Plug-and-play towbar loom for Wrangler JK/JKU with Surelink 2000 module—short-circuit protected, splashproof and CAN-friendly for clean, reliable 7-pin trailer lighting.
Plug-and-play JK tail-lamp connectors
Short-circuit protected, splashproof module
Clean 7-pin trailer light output
1 in stock
Built specifically for the Jeep Wrangler JK (2-door & Unlimited), this plug-and-play towbar wiring loom delivers a clean, reliable 7-pin trailer-lighting feed without cutting factory wires. OE-style waterproof connectors tee in at the rear lamps, while the compact Surelink 2000 interface module conditions and isolates signals—protecting the vehicle lighting system and preventing overloads.
The Surelink module is cost-effective and compact, featuring 4 channels, 2 LED activity indicators for quick diagnostics and a low 600 µA standby current. It’s splashproof, designed for South African conditions, and suitable for vehicles with or without CAN-bus. Ideal for leisure and bike trailers, caravans, camping and concession trailers where dependable lighting matters.
Installation is fast and tidy: plug in at the tail-lamps, mount the module on a dry interior panel, route the harness along the chassis to your towbar plate and terminate at a 7-pin socket. Approved fitment and service centres can install in minutes, keeping your Jeep’s wiring unmolested and your weekends rolling.
Vehicle-specific plug-in harness (left & right tail-lamp tees)
Surelink 2000 towing interface module (4-channel, 2 × status LEDs, low standby)
Waterproof connectors and loom protection
Fitting instructions (printed)
Fasteners: 3 × bolts & 3 × nuts
Plug-and-play towbar loom for Wrangler JK/JKU with Surelink 2000 module—short-circuit protected, splashproof and CAN-friendly for clean, reliable 7-pin trailer lighting.
Plug-and-play JK tail-lamp connectors
Short-circuit protected, splashproof module
Clean 7-pin trailer light output
R1 219,99 (incl. VAT)
1 in stock
Ready within 24 hours after confirmation.
Pickup Location 5 Ghaap St, N4 Gateway Industrial Park, Pretoria
Built specifically for the Jeep Wrangler JK (2-door & Unlimited), this plug-and-play towbar wiring loom delivers a clean, reliable 7-pin trailer-lighting feed without cutting factory wires. OE-style waterproof connectors tee in at the rear lamps, while the compact Surelink 2000 interface module conditions and isolates signals—protecting the vehicle lighting system and preventing overloads.
The Surelink module is cost-effective and compact, featuring 4 channels, 2 LED activity indicators for quick diagnostics and a low 600 µA standby current. It’s splashproof, designed for South African conditions, and suitable for vehicles with or without CAN-bus. Ideal for leisure and bike trailers, caravans, camping and concession trailers where dependable lighting matters.
Installation is fast and tidy: plug in at the tail-lamps, mount the module on a dry interior panel, route the harness along the chassis to your towbar plate and terminate at a 7-pin socket. Approved fitment and service centres can install in minutes, keeping your Jeep’s wiring unmolested and your weekends rolling.
Vehicle-specific plug-in harness (left & right tail-lamp tees)
Surelink 2000 towing interface module (4-channel, 2 × status LEDs, low standby)
Waterproof connectors and loom protection
Fitting instructions (printed)
Fasteners: 3 × bolts & 3 × nuts
Q1: Will this fit both JK and JKU?
Yes—designed for 2007–2018 Wrangler JK 2-door and Unlimited (JKU).
Q2: Why do I need the module?
The Surelink interface protects the vehicle’s lighting circuits and conditions signals for stable trailer output.
Q3: Is any splicing required?
No—this is a plug-and-play loom that tees into factory tail-lamp connectors.
Q4: Does it work with CAN-bus vehicles?
Yes—suitable for vehicles with or without CAN-bus, avoiding bulb-out errors.
Q5: 7-pin or 13-pin trailer plug?
The loom is set up for a 7-pin vehicle-side socket; use an adapter if your trailer uses 13-pin.
Connect with our team to explore tailored options
that perfectly fit your needs
